The importance of site selection for concrete batching plant

The concrete is different from other commodities. Once produced, it must be put into use quickly. Otherwise, concrete solidification will occur due to time, which will affect the quality of concrete, and even lead to the scrap of whole batch of concrete. Therefore, once batching plant to produce concrete after the fastest speed to the construction site for reasonable use.
Therefore, the stationary concrete batching plant in the early stage of the construction of should take good care of the surrounding environment, as far as possible to choose a place close to the construction site. Generally speaking, the distance between the concrete mixing station and our site should be within 10 km, and the maximum distance should be within 30 km. Of course, we need to analyze the specific problems according to the local environment.
Construction site of stationary concrete batching plant
First of all, the foundation map should be designed according to the customer's different engineering conditions, and the surrounding environment should be fully considered in the design of the foundation map, for example, the soil's softness or geographical location should be appropriate, and to ensure the adequate source of raw materials.
Secondly, according to the design of the foundation map, the foundation is built and embedded iron is embedded. This is the key to building. Therefore, if it is not buried in accordance with the drawings, there will be many problems in the construction of the station, resulting in the equipment can not be installed and debugged normally. Therefore, for the establishment of the station drawings must be established before the establishment of a good, must not be ignored.